PRODUCT OVERVIEW
This advanced Water Purity Tester is designed to identify the existence of most metals, minerals and inorganic chemicals. The higher the reading of your water: the less pure your water and the greater the probability of harmful contaminants in your water. The EPA's (Environmental Protection Agency) maximum recommended contaminant level for human consumption of drinking water is 500 ppm. It is not uncommon for well water and municipal water to register well over 500 ppm's on the Water Purity Tester.

Use the IntelliTEC™ Digital Water Purity Tester to:
• Instantly and accurately measure water purity at home, in the office or on the road;
• Avoid water with possible harmful contaminants like: Lead; Mercury; Arsenic and Cyanide;
• Save money by avoiding expensive bottled waters;
• Determine the need for a home or office water filtration system;
• Know when to change water filters. Maximize water filtration effectiveness.

FEATURES AND SPECIFICATIONS
Data Read Function: Saves measurements for convenient reading and recording.

Auto-Off Function: Turns Tester Off after one minute of non-use to save batteries.

Extended Range: Measures from 0 to 999 ppm, with a resolution of 1 ppm. A flashing reading of "999" indicates a reading over 999 ppm.

Auto Temperature Compensation: (takes 30 seconds) Calculates and adjusts reading to simulate 70° Fahrenheit (room temperature)

Purity Range: 0-999 ppm

Temp Range: 32-100° Fahrenheit (0-37° Celsius)

Accuracy: +/- 3%

Power Source: 2 LR44 or AG13 batteries. Replace batteries every 1 to 1 ½ years depending on usage.

Warranty: Two year limited warranty

Patents Pending

PRODUCT OVERVIEW
Doctors and Dentists agree; Washing hands for 20 seconds & brushing teeth for 2 minutes are the recommended times for proper hygiene. The “Wash & Brush” Timer helps you know just how long to brush your teeth and wash your hands. Perfect for kids and adults alike.

FEATURES AND SPECIFICATIONS
One Touch ON/OFF: Select wash or brush for automatic timer

Mounting Options: Hook and Loop tape, screws, or suction cups, all included

Power Source: 3 AAA batteries

Warranty: Two year limited warranty.

Patents Pending

HOW IT WORKS
• Press either the Wash or Brush Button. The button will illuminate blue.
The top lens will illuminate green and begin to blink.

• Being to wash or brush as the green LED Light/Timer is blinking. The speed of the green flashing light indicates your progress.

• The bottom light/lens will illuminate red when the time is up.

NOTE: If you accidentally press the wrong button, simply press the Reset button to reset the unit and start over.